Products by Standards
Standard | Title |
---|---|
ASTM B 611 | Abrasive Wear Resistance of Cemented Carbides |
ASTM D 1894 | Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
ASTM D 2266 | Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
ASTM D 2596 | Measurement of Extreme Pressure Properties of Lubricating Grease (Four-Ball Method) |
ASTM D 2783 | Measurement of Extreme Pressure Properties of Lubricating Fluids (Four-Ball Method) |
ASTM D 2509 | Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method) |
ASTM D 2782 | Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method) |
ASTM D 2981 | Wear Life of Solid Film Lubricants in Oscillating Motion |
ASTM D 3704 | Wear Preventive Properties of Lubricating Greases Using the Block on Ring Test Machine in Oscillating Motion |
ASTM D 3702 | Wear Rate of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
ASTM D 4172 | Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
ASTM D 5183 | Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine |
ASTM D 5706 | Measuring Wear Properties of Lubricating Greases using High Frequency Linear-Oscillating Test Machine |
ASTM D 5707 | Determining Wear Properties of Lubricating Greases using High Frequency Linear-Oscillating Test Machine |
ASTM D 6079 | Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) |
ASTM F 732 | Reciprocating Pin-on-Flat Evaluation of Friction and Wear Properties of Polymeric Materials for use in Total Joint Prostheses |
ASTM F 2661 | Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer |
ASTM G 65 | Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus |
ASTM G 76 | Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets |
ASTM G 77 | Wear Resistance by Block-on-Ring Wear Test |
ASTM G 99 | Wear Testing with a Pin-on-Disc Apparatus |
ASTM G 105 | Conducting Wet Sand/Rubber Wheel Abrasion Tests |
ASTM G 132 | Pin Abrasion Testing |
ASTM G 133 | Linearly-Reciprocating Ball-on-Flat Sliding Wear |
ASTM G 137 | Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-on-Ring Configuration |
ASTM G 171 | Scratch Hardness of Materials Using a Diamond Stylus |
ASTM G 181 | Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions |
ASTM G 211 | Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets |
BS 903: Part A61 | Physical Testing of Rubber: Determination of the Frictional Properties of Rubber |
BS EN 1071-6 | Advanced technical ceramics. Methods of test for ceramic coatings. Determination of the abrasion resistance of coatings by a micro abrasion wear test |
BS EN 1071-12 | Advanced technical ceramics. Methods of test for ceramic coatings. Reciprocating wear test |
CEC F-06-A-96 | Diesel Engines ? Diesel Fuel ? Performance Requirement and Test Method for Assessing Fuel Lubricity |
CEC L-45-T-93 | Viscosity Shear Stability of Transmission Lubricants (Taper Roller Bearing Rig) |
DEF STAN 91-110/1 | Wear Performance Test for Aqueous Polyglycol Based Hydraulic Fluids |
DIN 50324 | Measuring Friction and Wear: Model Experiments on Sliding Friction in Solids (Ball on Disc System) |
DIN 51350 (Part 6) | Testing Lubricants: Testing in the Shell Four Ball Tester ? Testing of Shear Stability of Lubricating Oils Containing Polymers |
DIN 51350 (Parts 1-5) | Testing Lubricants: Testing in the Shell Four Ball Tester |
IP 239 | Extreme Pressure Properties: Friction and Wear Test for Lubricants: Four Ball Machine |
IP 300 | Rolling Contact Fatigue Tests for Fluids in a Modified Four Ball Machine |
ISO/CD 11008 | Petroleum Products and Lubricants ? Determination of Extreme Pressure Properties of Lubricating Greases ? Four Ball Method |
ISO/DIS 12156-2 | Diesel Engines ? Diesel Fuel ? Performance Requirement and Test Method for Assessing Fuel Lubricity |
ISO/DIS 7148-2 | Plain Bearings ? Testing of the Tribological Behaviour of Bearing Materials |
JASO M 349-2001 | Test Method for Anti Judder Performance of Automatic Transmission Fluids |
Standard | Title |