Products by Standards

StandardTitle
ASTM B 611Abrasive Wear Resistance of Cemented Carbides
ASTM D 1894Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
ASTM D 2266Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
ASTM D 2596Measurement of Extreme Pressure Properties of Lubricating Grease (Four-Ball Method)
ASTM D 2783Measurement of Extreme Pressure Properties of Lubricating Fluids (Four-Ball Method)
ASTM D 2509Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)
ASTM D 2782Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
ASTM D 2981Wear Life of Solid Film Lubricants in Oscillating Motion
ASTM D 3704Wear Preventive Properties of Lubricating Greases Using the Block on Ring Test Machine in Oscillating Motion
ASTM D 3702Wear Rate of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
ASTM D 4172Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
ASTM D 5183Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
ASTM D 5706Measuring Wear Properties of Lubricating Greases using High Frequency Linear-Oscillating Test Machine
ASTM D 5707Determining Wear Properties of Lubricating Greases using High Frequency Linear-Oscillating Test Machine
ASTM D 6079Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM F 732Reciprocating Pin-on-Flat Evaluation of Friction and Wear Properties of Polymeric Materials for use in Total Joint Prostheses
ASTM F 2661Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
ASTM G 65Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
ASTM G 76Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
ASTM G 77Wear Resistance by Block-on-Ring Wear Test
ASTM G 99Wear Testing with a Pin-on-Disc Apparatus
ASTM G 105Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM G 132Pin Abrasion Testing
ASTM G 133Linearly-Reciprocating Ball-on-Flat Sliding Wear
ASTM G 137Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-on-Ring Configuration
ASTM G 171Scratch Hardness of Materials Using a Diamond Stylus
ASTM G 181Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
ASTM G 211Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
BS 903: Part A61Physical Testing of Rubber: Determination of the Frictional Properties of Rubber
BS EN 1071-6Advanced technical ceramics. Methods of test for ceramic coatings. Determination of the abrasion resistance of coatings by a micro abrasion wear test
BS EN 1071-12Advanced technical ceramics. Methods of test for ceramic coatings. Reciprocating wear test
CEC F-06-A-96Diesel Engines ? Diesel Fuel ? Performance Requirement and Test Method for Assessing Fuel Lubricity
CEC L-45-T-93Viscosity Shear Stability of Transmission Lubricants (Taper Roller Bearing Rig)
DEF STAN 91-110/1Wear Performance Test for Aqueous Polyglycol Based Hydraulic Fluids
DIN 50324Measuring Friction and Wear: Model Experiments on Sliding Friction in Solids (Ball on Disc System)
DIN 51350 (Part 6)Testing Lubricants: Testing in the Shell Four Ball Tester ? Testing of Shear Stability of Lubricating Oils Containing Polymers
DIN 51350 (Parts 1-5)Testing Lubricants: Testing in the Shell Four Ball Tester
IP 239Extreme Pressure Properties: Friction and Wear Test for Lubricants: Four Ball Machine
IP 300Rolling Contact Fatigue Tests for Fluids in a Modified Four Ball Machine
ISO/CD 11008Petroleum Products and Lubricants ? Determination of Extreme Pressure Properties of Lubricating Greases ? Four Ball Method
ISO/DIS 12156-2Diesel Engines ? Diesel Fuel ? Performance Requirement and Test Method for Assessing Fuel Lubricity
ISO/DIS 7148-2Plain Bearings ? Testing of the Tribological Behaviour of Bearing Materials
JASO M 349-2001Test Method for Anti Judder Performance of Automatic Transmission Fluids
StandardTitle