List of Publications

Publications using Ducom Tribometers

Publications since Jan 2014 using Ducom Instruments Tribometers
Ghazali, M.J., et al., Comparative wear study of plasma sprayed TiO2 and Al2O3–TiO 2 on mild steels. Tribology International, 2015.
Alhawari, K.S., et al., Evaluation of the microstructure and dry sliding wear behaviour of thixoformed A319 aluminium alloy. Materials & Design, 2015. 76 : p. 169-180.
Ali, N., et al., Assessment of fatigue and corrosion fatigue behaviours of the nitrogen ion implanted CpTi. International Journal of Fatigue, 2014. 61 : p. 184-190.
Arun, I., et al., Synthesis of electric discharge alloyed nickel–tungsten coating on tool steel and its tribological studies. Materials & Design, 2014. 63 : p. 257-262.
Aruna, S.T., C. Anandan, and V.K.W. Grips, Effect of probe sonication and sodium hexametaphosphate on the microhardness and wear behavior of electrodeposited Ni–SiC composite coating. Applied Surface Science, 2014. 301 : p. 383-390.
Aruna, S.T., et al., Cost-effective wear and oxidation resistant electrodeposited Ni–pumice coating. Surface and Coatings Technology, 2014. 251 : p. 201-209.
Babu, G.D., K.S. Babu, and P.N. Kishore, Tensile and Wear Behavior of Calotropis Gigentea Fruit Fiber Reinforced Polyester Composites. Procedia Engineering, 2014. 97 : p. 531-535.
Barros, R.C., T.G. Van Kooten, and D.H. Veeregowda, Investigation of friction-induced damage to the pig cornea. Ocul Surf, 2015.
Baskaran, S., V. Anandakrishnan, and M. Duraiselvam, Investigations on dry sliding wear behavior of in situ casted AA7075–TiC metal matrix composites by using Taguchi technique. Materials & Design, 2014. 60 : p. 184-192.
Bhingole, P.P., G.P. Chaudhari, and S.K. Nath, Processing, microstructure and properties of ultrasonically processed in situ MgO–Al2O3–MgAl2O4 dispersed magnesium alloy composites. Composites Part A: Applied Science and Manufacturing, 2014. 66 : p. 209-217.
Bolleddu, V., V. Racherla, and P.P. Bandyopadhyay, Microstructural and tribological characterization of air plasma sprayed nanostructured alumina–titania coatings deposited with nitrogen and argon as primary plasma gases. Materials & Design, 2014. 59 : p. 252-263.
Chang, B.P., et al., Comparative study of wear performance of particulate and fiber-reinforced nano-ZnO/ultra-high molecular weight polyethylene hybrid composites using response surface methodology. Materials & Design, 2014. 63 : p. 805-819.
Chmielewski, M., et al., Rhenium doped chromium-alumina composites for high-temperature applications. International Journal of Refractory Metals and Hard Materials, 2015.
Dinaharan, I., et al., Development of Al3Ti and Al3Zr intermetallic particulate reinforced aluminum alloy AA6061 in situ composites using friction stir processing. Materials & Design, 2014. 63 : p. 213-222.
Duraiselvam, M., et al., Laser surface nitrided Ti–6Al–4V for light weight automobile disk brake rotor application. Wear, 2014. 309 (1-2): p. 269-274.
Ezazi, M.A., et al., Enhancing the tribo-mechanical properties of aerospace AL7075-T6 by magnetron-sputtered Ti/TiN, Cr/CrN & TiCr/TiCrN thin film ceramic coatings. Ceramics International, 2014. 40 (10): p. 15603-15615.
Ganesh, B.K.C., et al., Effect of shotpeening on sliding wear and tensile behavior of titanium implant alloys. Materials & Design, 2014. 56 : p. 480-486.
Jeyasimman, D., et al., The effects of various reinforcements on dry sliding wear behaviour of AA 6061 nanocomposites. Materials & Design, 2014. 64 : p. 783-793.
Kang, A.S., G.S. Cheema, and S. Singla, Wear Behavior of Hardfacings on Rotary Tiller Blades. Procedia Engineering, 2014. 97 : p. 1442-1451.
Karim, Z., et al., Sliding wear evaluation of aluminum alloy (7075-T6) on hardened steel (AISI4340) via non-contact technique by I-kaz™ multi-level analysis. Wear, 2015. 334-335 : p. 99-104.
Karthick, R., P. Sirisha, and M.R. Sankar, Mechanical and Tribological Properties of PMMA-Sea Shell based Biocomposite for Dental application. Procedia Materials Science, 2014. 6 : p. 1989-2000.
Khanna, A.S. and W.S. Rathod, Development of CoNiCrAlY oxidation resistant hard coatings using high velocity oxy fuel and cold spray techniques. International Journal of Refractory Metals and Hard Materials, 2015. 49 : p. 374-382.
Kumar, B.A., N. Murugan, and I. Dinaharan, Dry sliding wear behavior of stir cast AA6061-T6/AlNp composite. Transactions of Nonferrous Metals Society of China, 2014. 24 (9): p. 2785-2795.
Kumar, V., R.D. Gupta, and N.K. Batra, Comparison of Mechanical Properties and Effect of Sliding Velocity on Wear Properties of Al 6061, Mg 4%, Fly Ash and Al 6061, Mg 4%, Graphite 4%, Fly Ash Hybrid Metal Matrix Composite. Procedia Materials Science, 2014. 6 : p. 1365-1375.
Leema, N., et al., Characterization, pore size measurement and wear model of a sintered Cu–W nano composite using radial basis functional neural network. Materials & Design, 2015. 68 : p. 195-206.
Lokhande, A.C. and J.S. Bagi, Studies on enhancement of surface mechanical properties of electrodeposited Ni–Co alloy coatings due to saccharin additive. Surface and Coatings Technology, 2014. 258 : p. 225-231.
Mahesh, K.V., et al., Polyaryletherketone polymer nanocomposite engineered with nanolaminated Ti3SiC2 ceramic fillers. Materials & Design, 2014. 63 : p. 360-367.
Makkar, P., R.C. Agarwala, and V. Agarwala, Wear characteristics of mechanically milled TiO2 nanoparticles incorporated in electroless Ni–P coatings. Advanced Powder Technology, 2014. 25 (5): p. 1653-1660.
Makkar, P., et al., A novel electroless plating of Ni–P–Al–ZrO2 nanocomposite coatings and their properties. Ceramics International, 2014. 40 (8): p. 12013-12021.
Manoj Kumar, R., et al., Effects of carbon nanotube aspect ratio on strengthening and tribological behavior of ultra high molecular weight polyethylene composite. Composites Part A: Applied Science and Manufacturing, 2015. 76 : p. 62-72.
Michael Rajan, H.B., et al., Effect of TiB2 content and temperature on sliding wear behavior of AA7075/TiB2 in situ aluminum cast composites. Archives of Civil and Mechanical Engineering, 2014. 14 (1): p. 72-79.
Muley, S.V., et al., Microstructural evolution in ultrasonically processed in situ AZ91 matrix composites and their mechanical and wear behavior. Materials & Design, 2014. 53 : p. 475-481.
Muthuraja, A. and S. Senthilvelan, Adhesive wear performance of tungsten carbide based solid lubricant material. International Journal of Refractory Metals and Hard Materials, 2015. 52 : p. 235-244.
Narasimha, G.B., M.V. Krishna, and R. Sindhu, Prediction of Wear Behaviour of Almg1sicu Hybrid MMC Using Taguchi with Grey Rational Analysis. Procedia Engineering, 2014. 97 : p. 555-562.
Panja, B. and P. Sahoo, Friction performance of electroless Ni-P coatings in alkaline medium and optimization of coating parameters. Procedia Engineering, 2014. 97 : p. 47-55.
Panja, B. and P. Sahoo, Wear Behavior of Electroless Ni-P Coatings in Brine Solution and Optimization of Coating Parameters. Procedia Technology, 2014. 14 : p. 173-180.
Peng Chang, B., et al., Optimization on wear performance of UHMWPE composites using response surface methodology. Tribology International, 2015. 88 : p. 252-262.
Poddar, P., A. Das, and K.L. Sahoo, Dry sliding wear characteristics of rheocast Mg–Sn based alloys. Materials & Design, 2014. 54 : p. 820-830.
Prabhakar, N.S., N. Radhika, and R. Raghu, Analysis of Tribological Behavior of Aluminium/B4C Composite Under Dry Sliding Motion. Procedia Engineering, 2014. 97 : p. 994-1003.
Rajesh, S., et al., Statistical Analysis of Dry Sliding Wear Behavior of Graphite Reinforced Aluminum MMCs. Procedia Materials Science, 2014. 6 : p. 1110-1120.
Rana, R.S., et al., Optimization of Wear Performance of Aa 5083/10 Wt. % Sicp Composites Using Taguchi Method. Procedia Materials Science, 2014. 6 : p. 503-511.
Rao, R.N., S. Das, and S.L. Tulasi Devi, Seizure pressure and sliding velocity diagrams on tribological behavior of Al alloy composites in as-cast and heat-treated conditions. Tribology International, 2014. 80 : p. 1-6.
Ruggiero, A., R. D’Amato, and E. Gómez, Experimental analysis of tribological behavior of UHMWPE against AISI420C and against TiAl6V4 alloy under dry and lubricated conditions. Tribology International, 2015. 92 : p. 154-161.
Ruggiero, A., et al., Tribo-mechanical characterization of reinforced epoxy resin under dry and lubricated contact conditions. Composites Part B: Engineering, 2015. 79 : p. 595-603.
Saravanan, I., et al., Optimizing wear behavior of TiN coated SS 316L against Ti alloy using Response Surface Methodology. Materials & Design, 2015. 67 : p. 469-482.
Sarraf, M., et al., Effect of microstructural evolution on wettability and tribological behavior of TiO2 nanotubular arrays coated on Ti–6Al–4V. Ceramics International, 2015. 41 (6): p. 7952-7962.
Sathiskumar, R., et al., Influence of tool rotational speed on microstructure and sliding wear behavior of Cu/B4C surface composite synthesized by friction stir processing. Transactions of Nonferrous Metals Society of China, 2015. 25 (1): p. 95-102.
Selvam, B., et al., Dry sliding wear behaviour of zinc oxide reinforced magnesium matrix nano-composites. Materials & Design, 2014. 58 : p. 475-481.
Senthil Kumar, M.S., et al., Tribological analysis of nano clay/epoxy/glass fiber by using Taguchi’s technique. Materials & Design, 2015. 70 : p. 1-9.
Sharma, S.K., B.V.M. Kumar, and Y.-W. Kim, Effect of WC addition on sliding wear behavior of SiC ceramics. Ceramics International, 2015. 41 (3): p. 3427-3437.
Singh, K., R.K. Khatirkar, and S.G. Sapate, Microstructure evolution and abrasive wear behavior of D2 steel. Wear, 2015. 328-329 : p. 206-216.
Singh, S. and R. Singh, Wear modelling of Al-Al2O3 functionally graded material prepared by FDM assisted investment castings using dimensionless analysis. Journal of Manufacturing Processes, 2015.
Sreekanth, P.S.R. and S. Kanagaraj, Influence of multi walled carbon nanotubes reinforcement and gamma irradiation on the wear behaviour of UHMWPE. Wear, 2015. 334-335 : p. 82-90.
Srinivasu, R., et al., Friction stir surfacing of cast A356 aluminium–silicon alloy with boron carbide and molybdenum disulphide powders. Defence Technology, 2015. 11 (2): p. 140-146.
Sudhakar, I., et al., Enhancement of wear and ballistic resistance of armour grade AA7075 aluminium alloy using friction stir processing. Defence Technology, 2015. 11 (1): p. 10-17.
Sudheer, M., et al., Enhanced Mechanical and Wear Performance of Epoxy/glass Composites with PTW/Graphite Hybrid Fillers. Procedia Materials Science, 2014. 6 : p. 975-987.
Suresh, S., et al., Mechanical behavior and wear prediction of stir cast Al–TiB2 composites using response surface methodology. Materials & Design, 2014. 59 : p. 383-396.
Thangarasu, A., N. Murugan, and I. Dinaharan, Production and Wear Characterization of AA6082 -TiC Surface Composites by Friction Stir Processing. Procedia Engineering, 2014. 97 : p. 590-597.
Thangarasu, A., et al., Synthesis and characterization of titanium carbide particulate reinforced AA6082 aluminium alloy composites via friction stir processing. Archives of Civil and Mechanical Engineering, 2015. 15 (2): p. 324-334.
Thuong, N.V., et al., Microstructural evolution and wear characteristics of equal channel angular pressing processed semi-solid-cast hypoeutectic aluminum alloys. Materials & Design, 2015. 67 : p. 448-456.
Vettivel, S.C., et al., Electrical resistivity, wear map and modeling of extruded tungsten reinforced copper composite. Materials & Design, 2014. 56 : p. 791-806.
Yuvaraj, N., S. Aravindan, and Vipin, Fabrication of Al5083/B4C surface composite by friction stir processing and its tribological characterization. Journal of Materials Research and Technology, 2015.
Zafar, S. and A.K. Sharma, Dry sliding wear performance of nanostructured WC–12Co deposited through microwave cladding. Tribology International, 2015. 91 : p. 14-22.
Banerjee, T. and A.K. Chattopadhyay, Structural, mechanical and tribological properties of WS2-Ti composite coating with and without hard under layer of TiN. Surface and Coatings Technology, 2014. 258 : p. 849-860.
Chakraborty, J., et al., Multifunctional gradient coatings of phosphate-free bioactive glass on SS316L biomedical implant materials for improved fixation. Surface and Coatings Technology, 2014. 240 : p. 437-443.
Chakraborty, S., et al., Mechanical and thermal properties of hot pressed ZrB2 system with TiB2. International Journal of Refractory Metals and Hard Materials, 2014. 46 : p. 35-42.
Chakraborty, S., et al., Densification, mechanical and tribological properties of ZrB2 by SPS: Effect of pulsed current. International Journal of Refractory Metals and Hard Materials, 2015. 48 : p. 150-156.
Chinchanikar, S. and S.K. Choudhury, Hard turning using HiPIMS-coated carbide tools: Wear behavior under dry and minimum quantity lubrication (MQL). Measurement, 2014. 55 : p. 536-548.
Ghosh, S., et al., Cordierite based glass-ceramic glazed floor tiles by microwave processing. Materials Characterization, 2014. 95 : p. 192-200.
Kaur, N., et al., Study of mechanical properties and high temperature oxidation behavior of a novel cold-spray Ni-20Cr coating on boiler steels. Applied Surface Science, 2015. 328 : p. 13-25.
Kumar, M., et al., Development of nano-crystalline cold sprayed Ni–20Cr coatings for high temperature oxidation resistance. Surface and Coatings Technology, 2015. 266 : p. 122-133.
Kumar, M., et al., Erosion–corrosion behavior of cold-spray nanostructured Ni–20Cr coatings in actual boiler environment. Wear, 2015. 332-333 : p. 1035-1043.
Mukherjee, J., et al., Mechanical and tribological properties of silicon carbide coating on Inconel alloy from liquid pre-ceramic precursor. Ceramics International, 2014. 40 (5): p. 6639-6645.
Mukherjee, J., et al., Enhanced nano-mechanical and wear properties of polycarbosilane derived SiC coating on silicon. Applied Surface Science, 2015. 325 : p. 39-44.
Palanivelu, R. and A. Ruban Kumar, Scratch and wear behaviour of plasma sprayed nano ceramics bilayer Al2O3-13wt%TiO2/hydroxyapatite coated on medical grade titanium substrates in SBF environment. Applied Surface Science, 2014. 315 : p. 372-379.
Pazhanivel, B., T.P. Kumar, and G. Sozhan, Machinability and scratch wear resistance of carbon-coated WC inserts. Materials Science and Engineering: B, 2015. 193 : p. 146-152.
Perumal, G., et al., Wear studies on plasma sprayed Al2O3–40wt% 8YSZ composite ceramic coating on Ti–6Al–4V alloy used for biomedical applications. Wear, 2014. 311 (1-2): p. 101-113.
Sangeetha, S. and G.P. Kalaignan, Tribological and electrochemical corrosion behavior of Ni–W/BN (hexagonal) nano-composite coatings. Ceramics International, 2015. 41 (9): p. 10415-10424.
Sarkar, S. and P.K. Das, Dry sliding wear characteristics of carbon nanotube/alumina nanocomposites under a sharp pyramidal indenter. Ceramics International, 2014. 40 (9): p. 13971-13978.
Sathish, S., M. Geetha, and R. Asokamani, Comparative Studies on the Corrosion and Scratchbehaviors of Plasma Sprayed ZrO2 and WC-Co Coatings. Procedia Materials Science, 2014. 6 : p. 1489-1494.
Habibullah, M., et al., Friction and wear characteristics of Calophyllum inophyllum biodiesel. Industrial Crops and Products, 2015. 76 : p. 188-197.
Mungse, H.P. and O.P. Khatri, Chemically Functionalized Reduced Graphene Oxide as a Novel Material for Reduction of Friction and Wear. The Journal of Physical Chemistry C, 2014. 118 (26): p. 14394-14402.
Singh, R.K., et al., Use of an Acylated Chitosan Schiff Base as an Ecofriendly Multifunctional Biolubricant Additive. Industrial & Engineering Chemistry Research, 2014. 53 (48): p. 18370-18379.
Singh, R.K., A. Kukrety, and A.K. Singh, Study of Novel Ecofriendly Multifunctional Lube Additives Based on Pentaerythritol Phenolic Ester. ACS Sustainable Chemistry & Engineering, 2014. 2 (8): p. 1959-1967.
Singh, R.K., et al., Study of cystine schiff base esters as new environmentally benign multifunctional biolubricant additives. Journal of Industrial and Engineering Chemistry, 2015. 26 : p. 149-156.
Sorate, K.A. and P.V. Bhale, Biodiesel properties and automotive system compatibility issues. Renewable and Sustainable Energy Reviews, 2015. 41 : p. 777-798.
Mondal, D.P., et al., Characteristics and wear behavior of cenosphere dispersed titanium matrix composite developed by powder metallurgy route. Transactions of Nonferrous Metals Society of China, 2014. 24 (5): p. 1379-1386.
Pandey, A.K. and K. Biswas, In vitro cytocompatibility, ageing and wear behavior of ceria stabilized zirconia bioceramic. Ceramics International, 2014. 40 (10): p. 15889-15895.
Roy, T., et al., Improved friction and wear performance of micro dimpled ceramic-on-ceramic interface for hip joint arthroplasty. Ceramics International, 2015. 41 (1): p. 681-690.
Siddharth Sharma, A., K. Biswas, and B. Basu, Microstructure-hardness-fretting wear resistance correlation in ultrafine grained Cu–TiB2–Pb composites. Wear, 2014. 319 (1-2): p. 160-171.
Telasang, G., et al., Wear and corrosion behavior of laser surface engineered AISI H13 hot working tool steel. Surface and Coatings Technology, 2015. 261 : p. 69-78.
Roy, S. and P. Sahoo, Optimization of Wear of Electroless Ni-P-Cu Coating Using Artificial Bee Colony Algorithm. Procedia Technology, 2014. 14 : p. 320-327.
Sudeepan, J., et al., Study of Tribological Behavior of ABS/ CaCO3 Composite Using Grey Relational Analysis. Procedia Materials Science, 2014. 6 : p. 682-691.
Sudeepan, J., et al., Study of Friction and Wear Properties of ABS/Kaolin Polymer Composites Using Grey Relational Technique. Procedia Technology, 2014. 14 : p. 196-203.
Praveen, A.S., et al., Erosion wear behaviour of plasma sprayed NiCrSiB/Al2O3 composite coating. International Journal of Refractory Metals and Hard Materials, 2015. 52 : p. 209-218.
Sudeepan, J., et al., Study of Friction and Wear of ABS/Zno Polymer Composite Using Taguchi Technique. Procedia Materials Science, 2014. 6 : p. 391-400.
Aruna, S.T., et al., Properties of plasma sprayed yttria stabilized zirconia thermal barrier coating prepared from co-precipitation synthesized powder. Ceramics International, 2014. 40 (7): p. 11157-11162.
Dandapat, N., et al., Thermal cycling behavior of alumina-graphite brazed joints in electron tube applications. Transactions of Nonferrous Metals Society of China, 2014. 24 (6): p. 1666-1673.
Ramesh, C.S., R. Keshavamurthy, and J. Madhusudhan, Fatigue Behavior of Ni-P Coated Si3N4 Reinforced Al6061 Composites. Procedia Materials Science, 2014. 6 : p. 1444-1454.
Lakshminarayanan, A.K., C.S. Ramachandran, and V. Balasubramanian, Feasibility of surface-coated friction stir welding tools to join AISI 304 grade austenitic stainless steel. Defence Technology, 2014. 10 (4): p. 360-370.
Ravichandran, G. and D. Gopinath, Ultrasonic relaxation studies on micelle formation in aqueous solutions of some bile salts. Journal of Molecular Liquids, 2014. 198 : p. 122-127.
Somanathan, N., B. Sambathkumar, and S.J. Ananthakrishnan, Studies on polythiophenes containing fused polyaromatic rings as side chains. European Polymer Journal, 2014. 52 : p. 23-31.
Agrawal, S., K.K. Singh, and P.K. Sarkar, A comparative study of wear and friction characteristics of glass fibre reinforced epoxy resin, sliding under dry, oil-lubricated and inert gas environments. Tribology International, 2015.
Alessandro, R., et al., Experimental Comparison on Tribological Pairs Uhmwpe/Tial6v4 Alloy, Uhmwpe/Aisi316l Austenitic Stainless and Uhmwpe/Al2o3 Ceramic, under Dry and Lubricated Conditions. Tribology International, 2016.
Arsha, A.G., et al., Design and fabrication of functionally graded in-situ aluminium composites for automotive pistons. Materials & Design, 2015. 88: p. 1201-1209.
Balasubramanian, I. and R. Maheswaran, Effect of inclusion of SiC particulates on the mechanical resistance behaviour of stir-cast AA6063/SiC composites. Materials & Design, 2015. 65: p. 511-520.
Banerjee, T. and A.K. Chattopadhyay, Structural, mechanical and tribological properties of pulsed DC magnetron sputtered TiN–WSx/TiN bilayer coating. Surface and Coatings Technology, 2015. 282: p. 24-35.
Chmielewski, M., et al., Rhenium doped chromium–alumina composites for high-temperature applications. International Journal of Refractory Metals and Hard Materials, 2016. 54: p. 196-202.
Das, A.K., S.M. Shariff, and A.R. Choudhury, Effect of rare earth oxide (Y2O3) addition on alloyed layer synthesized on Ti–6Al–4V substrate with Ti+SiC+h-BN mixed precursor by laser surface engineering. Tribology International, 2016. 95: p. 35-43.
Ganesh, R., R. Subbiah, and K. Chandrasekaran, Dry Sliding Wear Behavior of Powder Metallurgy Aluminium Matrix Composite. Materials Today: Proceedings, 2015. 2(4-5): p. 1441-1449.
Geetha, B. and K. Ganesan, The Effects of Ageing Temperature and Time on Mechanical Properties of A356 Aluminium cast Alloy with Red Mud Addition and Treated By T6 Heat Treatment. Materials Today: Proceedings, 2015. 2(4-5): p. 1200-1209.
Ghazali, M.J., et al., Comparative wear study of plasma sprayed TiO2 and Al2O3–TiO2 on mild steels. Tribology International, 2016. 93: p. 681-686.
Goyal, V., S.K. Sharma, and B.V.M. Kumar, Effect of Lubrication on Tribological Behaviour of Martensitic Stainless Steel. Materials Today: Proceedings, 2015. 2(4-5): p. 1082-1091.
Gupta, S., et al., Tribological characteristics of SiC ceramics sintered with a small amount of yttria. Ceramics International, 2015. 41(10): p. 14780-14789.
Kumari, R., et al., Laser surface textured titanium alloy (Ti–6Al–4V) – Part II – Studies on bio-compatibility. Applied Surface Science, 2015. 357: p. 750-758.
Liew, W.Y.H., et al., Reciprocating wear behavior of mild steel carburized using Na2CO3–NaCl. Tribology International, 2016. 95: p. 406-418.
Majumdar, J.D., et al., Investigation on femto-second laser irradiation assisted shock peening of medium carbon (0.4% C) steel. Applied Surface Science, 2016. 364: p. 133-140.
Masanta, M., S.M. Shariff, and A. Roy Choudhury, Microstructure and properties of TiB2–TiC–Al2O3 coating prepared by laser assisted SHS and subsequent cladding with micro-/nano-TiO2 as precursor constituent. Materials & Design, 2016. 90: p. 307-317.
Muley, S.V., et al., An assessment of ultra fine grained 316L stainless steel for implant applications. Acta Biomater, 2016. 30: p. 408-19.
Muthuraja, A. and S. Senthilvelan, Abrasive wear performance of tungsten carbide based self-lubricant cutting tool material. International Journal of Refractory Metals and Hard Materials, 2015. 51: p. 91-101.
Nuthalapati, M., S.K. Karak, and A. Basu, Synthesis and Characterization of Nano-Y2O3 Dispersed Zr-based Alloys by Mechanical Alloying and Conventional Sintering. Materials Today: Proceedings, 2015. 2(4-5): p. 1109-1117.
Nuthalapati, M., et al., Development of nano-Y2O3 dispersed Zr alloys by mechanical alloying and spark plasma sintering. Materials Science and Engineering: A, 2016. 650: p. 145-153.
Panda, D., L. Kumar, and S.N. Alam, Development of Al-Fe3Al Nanocomposite by Powder Metallurgy Route. Materials Today: Proceedings, 2015. 2(4-5): p. 3565-3574.
Pandey, A.K. and K. Biswas, Effect of hydrothermal treatment on tribological properties of alumina and zirconia based bioceramics. Ceramics International, 2016. 42(2): p. 2306-2316.
Pandey, A.K., U.R. Jena, and K. Biswas, In vitro ageing and wear behaviour of ceria stabilized zirconia toughened alumina (CSZ-TA) bio-ceramic. Materials Chemistry and Physics, 2014. 146(3): p. 456-463.
Pathania, A., et al., Development and analysis of tribological behavior of microwave processed EWAC+20% WC10Co2Ni composite cladding on mild steel substrate. Journal of Manufacturing Processes, 2015. 20: p. 79-87.
Pattanaik, A., M.P. Satpathy, and S.C. Mishra, Dry sliding wear behavior of epoxy fly ash composite with Taguchi optimization. Engineering Science and Technology, an International Journal, 2015.
Paul, C. and R. Sellamuthu, The Effect of Sn Content on the Properties of Surface Refined Cu-Sn Bronze Alloys. Procedia Engineering, 2014. 97: p. 1341-1347.
Prasad, A., et al., Micro-Scratch Based Tribological Characterization of Hydroxyapatite (HAp) Fabricated through Fish Scales. Materials Today: Proceedings, 2015. 2(4-5): p. 1216-1224.
Praveen, A.S., et al., Optimization and erosion wear response of NiCrSiB/WC–Co HVOF coating using Taguchi method. Ceramics International, 2016. 42(1): p. 1094-1104.
Rajan, H.B.M., et al., Influence of friction stir processing on microstructure and properties of AA7075/TiB2 in situ composite. Journal of Alloys and Compounds, 2016. 657: p. 250-260.
Rana, R.S., et al., Development and Wear Analysis of Al- Nano SiC Composite Automotive Cam. Materials Today: Proceedings, 2015. 2(4-5): p. 3586-3592.
Sahu, A. and A. Behera, Semi-solid Processing and Tribological Characteristics of Al-Cu Alloy. Materials Today: Proceedings, 2015. 2(4-5): p. 1175-1182.
Sangeetha, S., G.P. Kalaignan, and J.T. Anthuvan, Pulse electrodeposition of self-lubricating Ni–W/PTFE nanocomposite coatings on mild steel surface. Applied Surface Science, 2015. 359: p. 412-419.
Saravanan, I., et al., Optimization of wear parameters and their relative effects on TiN coated surface against Ti6Al4V alloy. Materials & Design, 2016. 92: p. 23-35.
Saravanan, I. and A.E. Perumal, Wear behavior of ?-irradiated Ti6Al4V alloy sliding on TiN deposited steel surface. Tribology International, 2016. 93: p. 451-463.
Sathiskumar, R., et al., Prediction of mechanical and wear properties of copper surface composites fabricated using friction stir processing. Materials & Design, 2014. 55: p. 224-234.
Sikder, P., et al., Improved densification and mechanical properties of spark plasma sintered carbon nanotube reinforced alumina ceramics. Materials Chemistry and Physics, 2016.
Singh, A.K., Siddhartha, and S. Hussain, Wear Peculiarity of TiO2 Filled Polyester-Based Homogeneous Composites and their Functionally Graded Materials Using Taguchi Methodology and ANN. Materials Today: Proceedings, 2015. 2(4-5): p. 2718-2727.
Sree Manu, K.M., et al., Structure and properties of modified compocast microsilica reinforced aluminum matrix composite. Materials & Design, 2015. 88: p. 294-301.
Sunil, J.R., et al., Optimization of Process Parameters for Plasma Sprayed Flyash-Titania Composite Coatings. Materials Today: Proceedings, 2015. 2(4-5): p. 2482-2490.
Tamilarasan, T.R., et al., Wear and scratch behaviour of electroless Ni-P-nano-TiO2: Effect of surfactants. Wear, 2016. 346-347: p. 148-157.
Vieira Marques, I.d.S., et al., Tribocorrosion behavior of biofunctional titanium oxide films produced by micro-arc oxidation: Synergism and mechanisms. Journal of the Mechanical Behavior of Biomedical Materials, 2015.